XCMG XZ5060 HDD Horizontal Directional Drilling Rig Machine

XCMG XZ5060 HDD horizontal directional drilling rig
XZ5060 HDD Horizontal Directional Drill Technical Specification
Product Model：XZ5060 Horizontal Directional Drill
Manufacturer：XCMG Foundation Construction Machinery Co.; Ltd.
XZ5060 HDD structure adopts crawl chassis, control house is available. It uses the power saving closed hydraulic system, equipped with electro-hydraulic proportion control, efficient advanced load sensitivity and XCMG’s patent technical. The main technical specifications reach the leader level in international. The main components of hydraulic system, transmission, electric system and gearbox are made of world first-class brand products, good performance, good reliability.

I.Features Introduction of XZ5060 HDD

1.Numerical meter display the working torque, push or pull force and so on parametric in working conditions. Electronic sensor has rapid reaction and can show overload immediately. It also endures accuracy and delay of the traditional hydraulic meter’s indication. It solve the matter to depend the operator to calculate the torque and force by the equipment’s switch directive.
2.Equipped with closed energy-saving circuit, load sensing control, electro-hydraulic proportional control and other advanced technology, Using the international famous brand components, reliable quality.
3.Dual-engines are used. The HDD has all the motion on the condition of any engine starting. Multi-condition technology of adjusting the travel speed combining with the multi-speed control of rotation and push or pull make HDD be suitable to the complex geology. You can use one engine in the condition of small pipe diameter in order to reduce the fuel consume. So it is inexpensive in construction.
4.Drill frame adjust by cylinder, work angle change more easy, safe.
5.Clamp can travel on the drill frame. It has the future of big torque and convenience of cathead. The HDD adopt the patent of rotation tooth. It is easy to achieve in clipping the pipe. It is reliable in clamping.
6.Sliding, rotating system multiple output, modular common rail fuel system and electronic control module, system energy saving, high efficiency of construction, efficiency increased more.
7.The HDD’s rotation adopt closed hydraulic system and it’s push or pull adopt load sensitivity technology. The main part of hydraulic and electric and transmission are made of world first-class brand products, good performance, good reliability.

II.Technology Introduction

1.Chassis

XZ5060 HDD adopts crawl chassis. It can fitted to more kind of ground and has high reliability. The travel gearbox producing by world first-class brand make it possible of good performance, good reliability.
Distance between wheel’s axis                   4025 mm
Width between two tracks outside              2750 mm
Width of track                                              600 mm
Length between two tracks                                  2150 mm
Number of track roller                             2×9
Gearbox of travelling                              2×ZFT60
Drive force                                                       415kN
Gradient                                                           30%
Travelling speed                                         1.5km/h
Ground pressure                                         112kPa

2.Engine

Power unit: the powerful engine has the turbine torque increment characteristic is made by Cummins. It meets for the request of China Stage III.
Model of engine                                    QSZ13-C475
Rated power                                             2×354kW/(1900r/min)
Max torque of engine                            2300 N·m /(1200~1500r/min)
Rated speed of engine                          China Stage Ⅲ
Capacity of fuel                                   1100L

3.Hydraulic System

Rotation adopts the closed hydraulic system. The movements of push or pull adopt load sensitivity technology. World first-class brand’s components can provide good performance and good reliability.
1） Rotation system
Pump                                                    4×Sauer H1P100
Pressure                                                     330bar
Motor                                                        3×Rexroth  A6V M200
2） Push and pull system
Pump                                                    2×Sauer D1P193
Pressure                                                    350bar
Motor                                                        8×Rexroth  A6V M160

4.Hydraulic oil tank

Capacity of  chassis Hydraulic oil tank                  700L

5.Electronic system

The HDD adopts intelligent and CAN bus control technology. The meter shows clearly and easy to see.
The HDD shows the actual torque and push or pull force immediacy in the large and high showing size monitor automatic.
PLC control technology can detect the engine speed, the temperature of cooling water, the pressure of lubrication, the temperature of hydraulic oil, the pressure or stoppage of filter element, the position of carriage etc. It can also alarm to the operator in wrong condition.
The HDD travel safety at stepless speed regulation and controlled by wire cable.
The multi-speed control of rotation and push or pull make HDD be suitable to the complex geology.
Voltage of electronic                            DC24V
Battery                                                    VARTA   6-QW-120B
Controller                                                Rexroth
Monitor                                                MURPHY
Handle of rotation                                 P+G
Sensor of speed                                   Rexroth
Switch of sensor                            Honeywell
Switch of route                              Honeywell
Sensor of temperature               Danfoss
Sensor of pressure                     Danfoss

6.Drill frame

The entry angel is changed by adopting the link weldment and cylinder. It has the advantage of simple and safety.
The drill frame is made by high tension steel. The pipe support is used in adding or take off the pipe. It is easy to operation and clip. It is convenient for the reason of the drill frame slide by the cylinder.
The distance of the drill frame slide           2500 mm
The  length of  the drill frame                             17000 mm
Entry angle adjust by drill frame                9～16°

7.Carriage

Push or pull is executed by rack and pinion. The HDD also use the floating axis to protect the pipe’s thread. The rapid speed is carried out by the variable motor. The speed of carriage and the force of push or pull can be executed steplessly.
Push/pull force                                      5300kN
Carriage speed                                      33m/min
Torque                                                   160000N·m
Spindle speed                                       80r/min
Distance of spindle moving                120mm
Distance of carriage moving               12000mm
Gearbox of rotation                                8×Brevini  SL4003
Gearbox of rotation                                3×Brevini  SL4002

8.Clamp

The HDD is fitted with the clamp so that the pipe can be gripped tightly. The clamp can move from the end of drill frame to another end of the drill frame. And it can do great good to operation in cathead condition. The fixed wise and rotation wise can separate or integrate. It has a good sight of clamp and is good to change the tooth.
Torque of clamp                                     320000N·m
Rotation angle                                       20°
Distance of clamp separation              300mm

9.Control room (optional)

Independent control room, with air condition can lift and go down by cylinder. It is also fitted with light, windscreen wiper, sunshade curtain, damping seat and suit for operation. All these increase comfortable while operating the HDD.
Import Voltage                                     AC 220V
Length of control room                   2991/5982mm
Width of control room                    2438mm
Hight of control room                     2591mm

10.Loader Crane(optional)

The HDD is assembled XCMG’s 5t Loader Crane. It was controlled by hand and It operate vey convenience.
Weight of lift                                       5t

11.Pipe and tools (optional)

Petrol pipe and No-dig pipe is available. Water wing backreamer, expander backreamer, compact fluted backreamer or the others special tools is available. The diameter is 400mm to 2000mm, The max distance which can deal with is 2000m. The customer should determine what kind of tools, joint, swivel will be used depend on the geology at the operation site.
Diameter of pipe                                        φ140/φ168mm
Length of pipe                                           9600mm
Joint of pipe                              5-1/2FH(φ140)/6-5/8FH(φ168)
Note. The force and torque on the pipe can’t reach to max at the same time. Please to obey the rules of the pipe. This can avoid the thread cement of the pipe.

III.Main technical parameters

IV.Core parts subsidiary

V.The Machine Appearance and Transportation

VI.The Machine Appearance and Transportation

XZ5060 horizontal directional drilling

Dimension of the upper part of the truck(L×W×H):   18500×2622×2530

XCMG xz5060 horizontal directional drilling rig

weight                                                   33t
Dimension of the upper part of the truck(L×W×H):   12000×3150×2560
weight                                                            26t
Photos
5060

xcmg xz5060 drilling rig

xcmg xz5060 directional drilling rig

xcmg xz5060

xcmg xz5060 hdd drill

XCMG XZ5060 hdd drilling rig