DCI Digitrack Falcon F5 detecting and guidence instrument

DCI Digitrack Falcon F5 detecting and guidence instrument

1.The first and only sub-kHz frequencies in the industry for
battling passive interference on the jobsite

2.Falcon evaluates hundreds of frequencies for the best
possible performance on every bore

3.Scan for interference, select optimum frequencies, and pair

transmitter at the jobsite

4.Switch between paired bands mid-bore

5.Full Scale Sensitive Pitch provides 0.1% resolution through

±99.9% slope for precision grade work

6.Max Mode filters noise to boost weak data signals and

stabilize depth readings

7.Standard warranty for 19″ and 15″ transmitters is
3 years/500 hours

Aggressive on Passive Interference

The ability to choose the right transmitter frequency is more
important than power in overcoming the effect of active
interference. In October of 2015, DCI introduced Falcon
technology, a significant new approach to overcoming active
interference on HDD jobsites.

DCI now introduces a DCI Digitrack Falcon F1 detecting and guidence instrument® transmitter that aggressively
targets passive interference. The Falcon Sub-k™ lets a locating
specialist scan the jobsite and select the best frequency in the
ultra-low 0.33-0.75 kHz (330-750 Hz) range. This new capability
is exclusive to Falcon F5 and gives HDD crews the ultimate
advantage over passive interference.

The Advantages of Wideband

A DCI Digitrack Falcon F5  transmitter provides versatility in all types of active
interference at frequencies of 4.5-45 kHz. The Falcon F5
wideband design vastly outperforms single frequency transmitters
of past generations. It also comes standard with fluid pressure
measurement. No other guidance system allows an operator to
scan for active interference and then pair optimized frequencies
to a transmitter at every jobsite. This provides substantial cost
savings and increases pilot bore productivity.